Zoben Rufin Alumina PVD don Tsarin Ajiye Tururi na Jiki

An ƙera zoben rufin PVD na St.Cera daga alumina mai ƙarfi 99.8% (Al₂O₃) don amfani a cikin tsarin adana tururi na zahiri (PVD). Zoben yana ba da keɓancewa ta lantarki tsakanin sassan ɗakin, yana hana arcing da kuma tabbatar da aiki mai kyau na plasma. Manyan halaye sun haɗa da ƙarfin dielectric mai yawa (15×10⁶ V/m), juriya ta musamman >10¹⁴ Ω·mm²/m, da kwanciyar hankali na zafi har zuwa 1600°C. Ikon injin ɗinmu na daidaito yana cimma diamita na waje har zuwa 600mm, diamita na ciki ƙasa zuwa 0.2mm, faɗin 0.003mm, da kuma ƙarewar saman Ra0.1. Sifili porosity na zoben da rashin kuzarin sinadarai suna tabbatar da aminci na dogon lokaci a cikin yanayin sputtering mai ƙarfi.

Bayani dalla-dalla (bisa ga 99.8% Al₂O₃& Ƙarfin masana'antu na St.Cera):

Aikace-aikace:

• · Masu hana farantin baya a cikin tsarin PVD
• · Masu hana iskar shaƙatawa na ɗakin
• · Masu hana zoben kariya a cikin tsarin sputtering
• · Keɓewa mai ƙarfin lantarki mai yawa a cikin ɗakunan plasma

Daidaiton Masana'antu:

Ma'aunin daidaito: 0.01mm, zagaye: 0.002mm, madaidaiciya: 0.005mm, madaidaiciya: 0.005mm, CMM ya tabbatar.

AAmfanin da ke tattare da polymer insulators:

• · Yana jure wa iyaka ta 1600°C idan aka kwatanta da iyaka ta polymers <300°C
• · Babu fitar da hayaki mai guba - yana kiyaye daidaiton injin tsabtace iska
• · Yana jure wa zaizayar jini da kuma harin sinadarai

Keɓancewa:

Sassan giciye na musamman, fasalulluka na hawa, bayanan matakai, da ƙira da yawa na zobe masu ma'ana da ake da su.